FreeCAD 10 simple 3D models, part 7
Welcome to the channel Miri tech workshop.
My name is Miro in this video there is an accelerated recording of the modeling of ten 3D models. During the entire process in FreeCAD, I primarily used Part Design and Sketcher. Some models may have been created using incorrect procedures, but some tips may inspire you. If you have ideas or constructive criticism, please share them in the comments. Have a nice day :)

1.
In today's video I drew a 3D part that looks like a shaped cover. I started in part design and by clicking on "Create empty document" I chose "Create body" and "Create sketch" I chose the plane in which I drew the sketch, I chose the XY plane. When creating, I used "circle" and "rectangle", I deleted the excess lines by clicking on the icon: "Trim edge" I defined the necessary dimensions so that the sketch did not have any degrees of freedom.
2.
To begin with, I chose "Part design" and created a new sketch, selected a plane. I drew the shape of the part, but only the part that I then rotated around the axis. I defined the necessary dimensions and used various connections. If I no longer had any degrees of freedom, I closed the sketch and used the "Revolution" function.
3.
To today's tutorial where I will guide you through the process of creating a 3D rotating part using FreeCAD version 0.21.1. In this step-by-step tutorial, I will demonstrate how to model this rotating part using various tools and functions within FreeCAD. To begin, we will select the "Part Design" option and create a new file along with a new sketch.
4.
A simple 3D model of a part drawn in "Part design" and "Sketch" I used create polyline and drew the shape. I switched from a straight line to drawing an arc by pressing the "M" key, I entered the dimensions and requirements so that I did not have any degrees of flexibility, and after closing the sketch, I created a 3D model using the "Pad".
5.
We start in Part design - New document - Create body - Create Sketch. We will use "Centered Rectangle" on the basis of the shape of the part, I will erase the top line and using "Create Polyline" we will create grooves, arcs by switching the M key, I have defined the necessary dimensions and diameter.


1. 3D model. 00:00
2. 3D model. 02:48
3. 3D model. 06:06
4. 3D model. 08:12
5. 3D model. 11:14
6. 3D model. 13:27
7. 3D model. 15:18
8. 3D model. 17:44
9. 3D model. 21:11
10. 3D model. 23:22

Vitajte na kanáli Miri tech workshop. Moje meno je Miro v tomto videu je zrychleny zaznam z modelovania desiatich 3D modelov. Počas celého procesu vo FreeCAD som primárne využíval Part Design a Sketcher. Niektoré modely mohli byť vytvorené pomocou nesprávnych postupov ale niektore tipy vas mozu inspirovat. Ak máte nápady alebo konštruktívnu kritiku, podeľte sa o ne v komentároch.
Prajem pekny den :)
#freecad #partdesign #3dmodeling #sketch

свернуть