A quick overview of almost every part I chose to use in my 1.6l forged Miata engine.
NOTICE!!! The engine itself should be capable of 500hp. This is not going over the exact supporting mods to do so, just the internal components. Two things I forgot to mention and will be adding are a billet oil pump and an ATI damper. Those are necessary for high HP
(pls ignore my hair sticking up in the back lol)
Parts used:
Block: Stock 1.6 bored to 78.5mm
Head: Stock
Crankshaft: Stock
Pistons: Supertech 78.5 8:1
Rods: Maxpeedingrods H beam
Rings: Wiseco 7850xx
Spark Plugs: NGK BKR7E
Bearings and Thrust Washers: ACL
Main and Head Studs: ARP
Water Pump Kit: DNJ
Gaskets: DNJ
Head Gasket: Felpro
CURRENT STAGE 1 MODS (250whp)
Injectors: RX8 Yellows
Clutch: EFT Stage 2
Turbo: TD04L-13T
![](https://s2.save4k.ru/pic/TkCg5QLvTFs/maxresdefault.jpg)