CSWIP 3.1 plate practical Examples.

Facebook [ Ссылка ]
Instagram [ Ссылка ]
Twitter [ Ссылка ]


Plate Thumb Print Report Example Name (Block capitals) Joe BLOGGS Signature Joe Blogs Test piece identification Example 1 Code used BW/VI/00 Welding process MMA (SMAW) Joint type Single V Butt Welding position Flat 1G/PA Length & thickness L=300mm t = 12.5mm Date 16/07/02 Note: all dimensions in mm ABC Plate Sample Cap Welding Process MMA (SMAW)Note: All dimension in mm Spatter and surface slag requires removal, arc strikes require grind smooth and check with MT Poor cap profile full weld length Linear misalignment full weld length D = 1.0 max T E C H N O L O G After you have completed your thumb print report sketch of your test plate the next step is to complete your final report again the report must be completed in ink (no pencil).The report must be completed to your thumb print sketch, do not leave any boxes empty, every box must be completed or dashed out. You must also make any comments you feel are necessary regarding any defects observed. The report form used in CSWIP will look like the following example. Final Report Print full name : Joe Blogs Plate identification : Example 1Defect type Pipe/plate section no Accumulative Total Maximum Table Accept/Reject Reinforcement (Height)Reinforcement (App)Incomplete filling Inadequate weld width Slag inclusions Undercut Surface porosity Cracks Lack of fusion Arc strikes Mechanical damage Laps/Laminations Misalignment A - CL= 10 , D = 3.02.0 Rejected

свернуть