Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]
This video shows you how to install a new TRQ CV axle in your 2012-2016 Subaru Impreza. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2012 Subaru Impreza
2013 Subaru Impreza
2014 Subaru Impreza
2015 Subaru Impreza
2016 Subaru Impreza
Tools you will need:
• 12mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Straight Cutters
• 1/2 Inch Impact Gun [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
