Shop for New Auto Parts at 1AAuto.com [ Ссылка ]
This video shows you how to install a new, engineered to fit TRQ throttle body on your 2003-2011 Honda Element. Rough idle, poor performance, and a check engine light are all signs of throttle body problems. If a thorough cleaning didn’t resolve the issues, you may need to replace the assembly.
This process should be similar on the following vehicles:
2003 Honda Element
2004 Honda Element
2005 Honda Element
2006 Honda Element
2007 Honda Element
2008 Honda Element
2009 Honda Element
2010 Honda Element
2011 Honda Element
Tools you will need:
• Phillips Bit in a Ratchet [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• 12mm Wrench [ Ссылка ]
• 10mm Deep Socket
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 8mm Deep Socket
• 8mm Socket [ Ссылка ]
• Locking Pliers [ Ссылка ]
• Pliers
• 1/2 Inch Ratchet [ Ссылка ]
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Swivel
• Gloves [ Ссылка ]
• Hose Clamp
• Safety Glasses [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![](https://i.ytimg.com/vi/UKLbm-AumM8/maxresdefault.jpg)