This is a time-lapse of repairing a water damaged Mavic Mini. I got my hands on it several weeks after the crash and so the corrosion was pretty bad (as you'll see at 3:00). I chose to use an ultrasonic cleaner from SRA along with their PCB cleaning fluid as a simple rinse/brush probably wouldn't do it. It's on the pricey side but I considered it an investment for similar electronics repairs. Cheaper versions of ultrasonic cleaners are available and will probably work. I also found a torn ribbon cable which I replaced.
TOOLS USED
Ribbon Cable
Ultra Sonic Cleaner
PCB Cleaning Fluid
99.9% IPA
Deionized Water
Liquid Electrical Tape
Heat Gun
Weller Soldering Iron
Tweezers
Precision Screwdriver Set
MUSIC CREDITS
Danger Around The Corner by Darren-Curtis | [ Ссылка ]
Music promoted by [ Ссылка ]
Creative Commons Attribution 3.0 Unported License
[ Ссылка ]
Synthetic by | e s c p | [ Ссылка ]
Music promoted by [ Ссылка ]
Attribution 4.0 International (CC BY 4.0)
[ Ссылка ]
Caramellow by Purrple Cat | [ Ссылка ]
Music promoted by [ Ссылка ]
Creative Commons Attribution-ShareAlike 3.0 Unported
[ Ссылка ]
Surface Level by Schematist | [ Ссылка ]
Music promoted by [ Ссылка ]
Creative Commons Attribution 3.0 Unported License
[ Ссылка ]
Superepic by Alexander Nakarada | [ Ссылка ]
Music promoted by [ Ссылка ]
Attribution 4.0 International (CC BY 4.0)
[ Ссылка ]
![](https://i.ytimg.com/vi/UPOy0443RFQ/mqdefault.jpg)