Clean a print head while it is inside a PIXMA printer - flushing the ink port with print head cleaner using refill syringe and plastic tube.
This works for PIXMA printers using the following cartridges: PGI-580 / CLI 581, PGI-570 / CLI 571, PGI-550 / CLI 551, PGI-525 / CLI-526, PGI-270 / CLI-271, PGI-250 / CLI-251, PGI-225 / CLI-226, PGI-280 / CLI-281
Print head cleaner by Octopus: [ Ссылка ]
@AMAZON search for: B076525TKK

FAQ:
Q:
I just cleaned all ink colors with an Canon cleaning kit. When I run the printer, all I get is wet paper and no ink appears on the paper.
A:
After the cleaning there is still some cleaning fluid remaining in the print head, that is whay You get wet paper when printing after cleaning. It is the best way to print out this remaining nozzle cleaner - please use old paper to do these test prints. According to Your printer model it may take many print to get out the cleaner, but this way the waste ink pad in Your printer is not polluted unneccessarily.

All manufacturers and brand names are used only to indicate compatibility and are the property of their respective owners. Octopus® assumes no warranty, responsibility or liability for the success or any consequences resulting from the procedures of its instructions.

свернуть