Guy said that he's shinka won't start so went and check it out !!
Here is how to diagnose your rotary engine
#1
Make sure your battery is fully charge
#2
make sure the car have gas
#3
When you crank the engine Pay attention and listen a good strong crank
#4
Remove lower spark plugs,make sure they are not wet,if they are dry , crank the engine,make sure you hear a good cranking noise and air coming through the spark plug holes
#5
Good crank but car goes over nd over but still won't start?
While the plugs are off the housings ADD OIL INTO THE HOLES - PUT SPARK PLUGS BACK and crank the engine,IF ENGINE STARTS ""YOU NEED NEW APEX SEALS""
#6
Go back to YouTube and learn how to rebuild your rotary engine 😂😂
My IG: 13b_dorito
Here is some useful links for tools that you need to get this job done and that you will need on any other projects you might have!!
my go to scanner 👉[ Ссылка ]
Scanners that i own and recommend 👉
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
Head bolts for the LT engine left side "driver side" the one with the black Allen bolt 👉
[ Ссылка ]
Chevy LT solid lifters "make sure you look up it fits your chevy LS LT engine"👉
[ Ссылка ]
This one here is my go-to head set gasket kit "all you need to re install the heads" works for me on tahoe,silverado, suburban!!👉
[ Ссылка ]
AFM DOD lifter with spring acDelco 👉
[ Ссылка ]
My go-to favorite powerful impact gun cheaper nd better than milwaukee 👉
[ Ссылка ]
swivel sockets 👉[ Ссылка ]
metric socket kit 👉[ Ссылка ]
wrench set 👉[ Ссылка ]
brush kit 👉[ Ссылка ]
double side ratchet wrench
👉[ Ссылка ]
impact better than snapon and cheap
👉[ Ссылка ]
better nd cheaper than snap on
👉[ Ссылка ]
Jack stands 👉[ Ссылка ]
ratchet set 👉[ Ссылка ]
what i use to record the video
👉[ Ссылка ]
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
