Say "NO" to blue tape! When polishing frets and performing other fret work, there is nothing like peace of mind that you are not going to damage the fretboard, plus saving time and money. MusicNomad's patent pending Fret Shield sets a new higher standard for total fretboard protection when performing fretwork. This reusable design goes on in seconds, fully protects without damaging the fretboard and lasts 100's of fret jobs. Our high quality stainless steel is the perfect thickness at .008" (.20mm), uses a precision manufacturing process free of burrs, and leaves all edges smooth and rounded. Our innovative formed drop-down edges allow the rubber bands we include to hold the Fret Shield in place securely and keep the bands below the top surface to avoid damaging them during the polishing process. Fret Shields come in the most popular Fret Scale sizes and even include a convenient hang hole. Whether your fretboard is finished maple or unfinished rosewood with inlays, your board will thank you for protecting it. That's MusicNomad quality - raising the bar in equipment care.

With many different Fret Shields, make sure you choose the one that fits your Fret Scale size by using a tape measure or ruler, align the 1” mark with the inside edge of the nut and measure to the center of the 12th fret. Take the difference between the measurement and 1” and double it to calculate your guitar scale. You can also visit our website and contact our in-house tech for questions.

5 Fret Scale sizes available:
Fret Shield™: F-25.5" - MN800
Fret Shield™: G-Electric Guitar - MN801
Fret Shield™: P-25" - MN802
Fret Shield™: M-25.34" - MN803
Fret Shield™: E-24.75" (not recommended for Gibson) - MN804

For more info & to find out where to buy it visit: [ Ссылка ]

свернуть