*Did our video help you? If so, consider buying us a beer: [ Ссылка ]*

In this video, we show you how to install a Yota 1 Performance ARB Air Compressor Mount Bracket in a 3rd Gen Toyota 4runner. This bracket fits perfectly into the passenger side of your engine compartment using existing factory mounting holes. There is no drilling, tapping or any other needed modifications to install this bracket. It is a 100% Plug & Play install.

**PARTS**
Yota 1 Performance ARB Air Compressor Mount Bracket (4runner 1996-2002)
[ Ссылка ]

ARB Air Compressor Kit
[ Ссылка ]


**HELPFUL TOOLS**
*Flex Head Box End Wrench Set - (Great set of functional wrenches. Used to release cruise control cable from the throttle body bracket.)
[ Ссылка ]

*Tekton Extra Long Flex-Head Ratcheting Box End Wrench Set - (Nice long wrenches to give you extra reach and leverage. Used one when tightening the cruise control module to the Yota1 bracket)
[ Ссылка ]

*1/4" and 3/8" Flex Head Ratchet Set - (Super functional ratchets. With flex heads and 120 points of engagement, they get the job done that other ratchets can't. Used the 1/4" ratchet in this video)
[ Ссылка ]

*1/4" Drive Socket Set
[ Ссылка ]

*3/8" Drive 6 Point Metric Standard Socket Set
[ Ссылка ]

*Metric Allen Head Socket Set (Nice complete allen socket set. Used the 4mm socket for the Yota1 bracket side plate bolts and for the ARB mounting bracket bolts.)
[ Ссылка ]

*Impact Socket Adapter and Reducer Set - (This is a nice set of increasers and reducers. Used a reducer 3/8" to 1/4" reducer with the 3/8" Milwaukee ratchet for the 4mm allen socket that was 1/4" drive.) [ Ссылка ]

*3/8” Drive Regular Extension Set
[ Ссылка ]

*1/4” Drive Regular Extension Set
[ Ссылка ]

*Milwaukee M12 3/8” Cordless Extended Reach Ratchet - (Great ratchet that saves tons of time removing and installing fasteners.) [ Ссылка ]

*Milwaukee M12 Battery
[ Ссылка ]

*Milwaukee M12 High Capacity Battery
[ Ссылка ]

*Milwaukee M12 Battery Charger
[ Ссылка ]

*Allen Wrenches (Metric and SAE) - (Nice set of Metric and SAE allen wrenches. Use the 4mm allen wrench for the Yota1 side bracket installation.)
[ Ссылка ]

*JIS Screwdriver - (Japanese Industrial Standards. Japanese vehicles actually use JIS screws and not Phillips head screws. They are similar but a JIS screwdriver will get a better bight on a JIS screw.) [ Ссылка ]

**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates, we earn from qualifying purchases.

свернуть