This video covers the final part of the internal wiring. The next video will go over a few final voltage tweaks before we put this on the scope and run some distortion vs power tests. I'll be interested to see what kind of drive this amp needs to hit full power.
You can viewing wiring the RCA jacks here: [ Ссылка ]
Also note: the output jacks end up needing to be reversed after the final power up testing. This is why I ask you to be patient and wait till I am finished building and testing a prototype amp before asking for a BOM or schematics.
This is a build series on what's called a "spud" amp. It's using a 6BQ5 EL84 output tube only, with a 6CA4 rectifier. It's wired as a SE pentode with a unique local negative feedback loop and probably is going to require a preamp to reach full power.
It should be a great beginner amp to build and my goal in building it is to use it for a pre-amp shootout!
I plan to get a BOM and such on my website this week. Please be patient as I want it to accurately reflect the final build.
