I did a silly and installed the steel L brackets for the cabin frame on the AFT side of the tube, when they SHOULD be on the FORWARD side. So that's what I get for not looking closely enough. It's fixable, though!
🛠🧰🛠Tools We Use to Build Our Airplane (that you can get from Amazon)🛠🧰🛠
+ Rivet Gun [ Ссылка ]
(Be sure to use the custom heads from Zenith for the Zenith rivets!)
+ Gyroscopic Lithium Screwdriver [ Ссылка ]
+ Swivel Deburring Tool [ Ссылка ]
+ Edge Deburring Tool [ Ссылка ]
+ 1/4” Drive Torque Wrench [ Ссылка ]
+ 3/8” Drive Torque Wrench [ Ссылка ]
+ Orange Rubber Tool Tray [ Ссылка ]
+ Magnetic Parts Holder [ Ссылка ]
+ Dental Picks [ Ссылка ]
+ Tap & Die Set [ Ссылка ]
+ Deburring Wheel for Drill [ Ссылка ]
+ Fluting Pliers [ Ссылка ]
+ 1/8” (copper) Clecos [ Ссылка ]
+ 5/32” (black) Clecos [ Ссылка ]
+ 3/16” (gold) Clecos [ Ссылка ]
+ Right-Angle Drill Attachment [ Ссылка ]
+ 300mm Metric/Standard Ruler [ Ссылка ]
+ Vise-Grip Pliers [ Ссылка ]
+ Round File [ Ссылка ]
+ Flat File [ Ссылка ]
(By the way, I'm supposed to let you know that these are affiliate links. So if you make a purchase using these links, I will make a small commission (but at no extra cost to you 👍))
DISCLAIMER
This video is intended for informational purposes only, and may include information that is inaccurate or not applicable to any other situation. Use any information at your own risk. The individual views and opinions expressed here are solely those of the individual. Always follow manufacturer recommendations and FAA regulations and best practices.
![](https://s2.save4k.ru/pic/VpZ-JNYzzOo/maxresdefault.jpg)