Get ten 100x100mm one or two layer high quality PCBs for just $5 plus shipping from sponsor of this video: [ Ссылка ]
I've modified cheap USB-C TP4056 charging module design to actually make it work and at the same time, to make it easier to solder.
Buying any kind of electronis module with USB-C from Aliexpress is a gamble. There are SO MANY different modules that don't include 5.1kOhm pull-down resistors on CC1 and CC2 pins. Without them, the modules won't work with proper USB-C power supply or computer's USB-C port. They do work with USB-A to USB-C cable, but not with USB-C to USB-C.
In this video I show latest USB-C problem I've encountered and also my modified version of the problematic module. My module was designed to be soldered using regular soldering iron and solder, no need for reflow ovens or solder paste... But flux is necessary!
0:00 Module from Aliexpress
0:45 Sponsored PCBWAY.COM ad
1:26 The problem with original module
2:45 Modification (VERY hard, AVOID!)
3:20 My new board
If you liked the video, please show it and hit the Like-button!
Check out my other videos:
[ Ссылка ]
Subscribe:
[ Ссылка ]
