We are going over the steps to install aftermarket Snail Horn on a 2021 Mustang GT. This will include the wiring route, products used, and sound testing.
1. Intro - 0:01
2. Step 1 (Remove Battery Cover Retaining Clips) - 0:14
3. Step 2 (Remove Battery Cover) - 0:25
4. Step 3 (Remove Negative Terminal) - 0:32
5. Step 4 (Loosen Lug Nuts) - 0:54
6. Step 5 (Lift Vehicle) - 1:26
7. Step 6 (Remove Lug Nuts & Wheel) - 2:02
8. Step 7 (Remove Splash Shield Retainers) - 2:38
9. Step 8 (Remove Fender Splash Shield) - 3:44
10. Step 9 (Clean Mounting Surface) - 4:09
11. Step 10 (Mount New Horn) - 4:47
12. Step 11 (Prep Wiring Harness) - 6:01
13. Step 12 (Install Wiring Harness) - 7:03
14. Step 13 (Secure Wiring Harness) - 8:01
15. Step 14 (Remove Radiator Sight Shield) - 9:16
16. Step 15 (Run Horn Power Wire) - 9:53
17. Step 16 (Secure Horn Power Wire) - 10:40
18. Step 17 (Connect Horn Power Wire) - 11:23
19. Step 18 (Install Radiator Sight Shield) - 12:25
20. Step 19 (Install Fender Splash Shield) - 12:42
21. Step 20 (Install Splash Shield Retainers) - 12:56
22. Step 21 (Install Wheel & Lug Nuts) - 13:37
23. Step 22 (Lower Vehicle) - 13:51
24. Step 23 (Torque Lug Nuts) - 13:58
25. Step 24 (Connect Negative Terminal) - 14:18
26. Step 25 (Install Battery Cover) - 14:30
27. Step 26 (Install Battery Cover Retaining Clips) - 14:37
28. Test Horn Operations - 14:46
Products Used:
This video contains affiliate links for which I may receive compensation.
14ga Power Wire - [ Ссылка ]
Air Horn - [ Ссылка ]
Butt Connectors - [ Ссылка ]
Car Horn Pigtail - [ Ссылка ]
Crimping Tool Kit - [ Ссылка ]
Heat Shrink Tubing - [ Ссылка ]
Hook and Pick Set - [ Ссылка ]
Loom Tubing - [ Ссылка ]
Nitrile Gloves - [ Ссылка ]
Torque Wrench - [ Ссылка ]
Trim Removal Tool Set - [ Ссылка ]
Wire Cutter & Crimper - [ Ссылка ]
Zip Tie Mounts - [ Ссылка ]
Tools:
1/4" Socket Wrench
1/2" Breaker Bar (or Impact Wrench)
10mm Socket
14mm Socket
21mm Socket
Crimping Tool
Heat Gun
Heat Shrink Tubing
Hook and Pick Set
Isopropyl Alcohol 91% (IPA)
Jack Stands
Jack
Microfiber Cloth
Torque Wrench (Req: 150 ft-lb)
Trim Removal Tool Set
Wire Cutters
Wire Crimpers
#SnailHorn
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk.
Ещё видео!