Rcf HDL 30-A Active Two-Way Line Array

2200W TWO WAY AMPLIFIER
137 DB MAX SPL
EXCLUSIVE FIRPHASE TECHNOLOGY ON-BOARD
RDNET CONTROL AND MANAGEMENT

2200W Two Way Amplifier
137 dB Max SPL
48 kHz, 32 bit DSP processing
1.4" Titanium Compression Driver, 4.0" voice coil
2 x 10" Neodymium Woofers, 2.5" voice coil
Exclusive FiRPHASE technology on-board
RDNet Control and Management
680 Hz Crossover Point

The RCF HDL30-A is a compact bi-amped 2-way active touring system for medium to large events, both indoors and outdoors. It features two 10-inch woofers and an impressive 4-inch titanium compression driver. The time coherent waveguide is the result of in-depth research and design. HDL 30-A is the first line array in a composite cabinet with zero-degree phase and ultra-linear amplitude response. The built-in 2200 watt class-D amplifier delivers excellent playback clarity and up to 137 decibels SPL max. The RCF HDL30 -A features state of the art RCF transducers with neodymium magnets. Considering its acoustical power, it has a remarkably low weight for easy handling and flying. The HDL 38-AS is the ideal flyable bass complement for the HDL 30-A array system.

RCF RDNet
NETWORKED CONTROL AND MUCH MORE
RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.

POWERFUL CLASS D AMPLIFIER
RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. HDL amplifiers deliver a ultra-fast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the HDL amplifiers present SMPS power supply section to produce maximum output and minimum weight.

NEODYMIUM RCF PRECISION TRANSDUCERS
HIGH FREQUENCIES - Superior compression driver with extreme precision in high frequency reproduction.

High-performance RCF ND940
4.0-inch diaphragm titanium compression driver
1.4-inch exit throat
680 Hz Crossover Point

LOW FREQUENCIES - High power woofers. Very high efficient and controlled bass reproduction.

2 X 2.5”voice coil neodymium 10” woofers
Low frequencies handling down to 50 Hz
Water resistant fibre doped cone
Polycotton M-roll surround
Hypervented magnetic structure

REVOLUTIONARY RIGGING CONCEPT
The high strength enclosure in composite polypropylene has a revolutionary new rigging concept inspired by its big brother: the RCF HDL-50A. Compared to its acoustical power, it has a remarkably low weight for easy handling and flying. The integrated mechanics are both fast and reconfigurable, allowing the system engineer to create J-shaped and spiral arrays starting with 0.2° angles. The hardware is designed for an easy and fast setup. The angle can be adjusted before to hang the system, on the ground, and slip automatically into the correct position when pulling up the array. Up to 20 HDL 30 -A modules can be fastened on a single flybar.

Transducers
COMPRESSION DRIVER:
1 x 1.4'' neo, 4.0'' v.c

WOOFER:
2 x 10'' neo, 2.5'' v.c

Power section
TOTAL POWER:
2200 W Peak, 1100 W RMS

HIGH FREQUENCIES:
600 W Peak, 300 W RMS

LOW FREQUENCIES:
1600 W Peak, 800 W RMS

COOLING: Forced

CONNECTIONS: Powercon IN/OUT

Physical specifications
CABINET/CASE MATERIAL:
PP Composite

HARDWARE: Array fittings

HANDLES: 2 Side

GRILLE: Steel

COLOR: Black

Size

HEIGHT: 293 mm / 11.54 inches

WIDTH: 705 mm / 27.76 inches

DEPTH: 502 mm / 19.76 inches

WEIGHT: 25 kg / 55.12 lbs

Shipping information

PACKAGE HEIGHT: 365 mm / 14.37 inches

PACKAGE WIDTH: 800 mm / 31.5 inches

PACKAGE DEPTH: 550 mm / 21.65 inches

PACKAGE WEIGHT: 28.2 kg / 62.17 lbs

4 PATH WAVEGUIDE
The custom 4 PATH designed waveguide allows a precise coverage of 100 x 15 degrees, while also delivering an excellent, linear high-frequency response. The unique shape of the four ducts forming the guide creates an ideal isophasic load from 680 Hz to the highest audible frequencies.

свернуть