Buy Now!
New Ball Joint from 1AAuto.com [ Ссылка ]
This video shows you how to install new, quality TRQ ball joints on your 2007-2012 Nissan Versa. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 13mm Wrench [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• 30mm Socket
• Ball Joint Press
• Wire Cutters
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags [ Ссылка ]
• Cotter Pin
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Chisel [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Ratchet Strap
• Wheel Chocks
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
