Product Page Link - [ Ссылка ]
The TSCS1 Deform-Nut is a threaded insert system that combines mechanical anchoring and structural adhesive to provide strong load-bearing threads in sandwich panel materials (with a honeycomb or composite internal structure). The Deform-Nut can be used in any composite material panel, resins, carbon fiber, light alloy, and more.
Expensive or complex solutions such as resin potting or bonding of bushes and tie rods can be avoided with the use of this insert.
Furthermore, Deform-Nut allows you to use the same type of product in a wide range of sandwich panel materials and thicknesses, is easy and quick to install and doesn't require any further processes or finishing after installation.
Installation Method:
1. Drill the correct hole from one side of the panel (blind hole)
2. Insert the rivet nut in the hole
3. Using rivet tool, pull up the rivet nut to to attach it to the top skin of the sandwich panel
4. Inject structural adhesive
5. Insert and screw down the threaded adjusting insert until it reaches the bottom skin of the sandwich panel
6. Fastener is ready for use (time to full strength is dependant on structural adhesive properties)
Learn More about Specialinsert Here:
[ Ссылка ]
Order Deform-Nut Here:
[ Ссылка ]
Want to know more? Contact Us Today!
1-800-220-1966 or sales@chemical-concepts.com
