When using high-temperature materials, always minimize part failures caused by simple things, especially by poor bed adhesion. Nano Polymer Adhesive is designed to minimize failures on high-end polymers. Whether you run a print farm or make single, high-temperature, functional 3D prints, this adhesive will make your work far easier.
Nano Polymer Adhesive:
[ Ссылка ]
Samples (promotion ended, $5 + shippnig):
[ Ссылка ]
Fortunately, Vision Miner spent over a year developing Nano Polymer Adhesive and discovered it works great for ABS, PLA, PETG. One top feature of this glue is that it takes only 15 seconds to apply, and it’s easy to clean up, which makes part removal a breeze. Using one-layer coats on a 7”x7” build plate, a jar covers 200+ coatings.
-- First, clean your plate with Windex®, water, or alcohol.
-- Second, hold the bottle like a pen, and draw an X, only in print area - then draw a circle around it, and spread it around with the brush. (Best results = apply in one direction, then the opposite direction.)
-- Third, simply clean the brush with water and set it aside to dry.
(We recommend two coatings for wider, high-temperature parts. In terms of mass, 0.5 grams of glue is good for most prints; 1-3 grams is better to print wider parts.
To remove low-temperature parts (Nylon, PLA,ABS): let plate cool. The part will pop itself off.
To remove high-temperature prints: you must get the part off ASAP. The difference in shrinkage between a glass plate and a part is so dramatic, the glass can break.
(Different build plate materials also affect easy removal.)
How often to reapply adhesive? With PEEK, PEI, and other expensive, high-temp filaments, we recommend cleaning and re-applying for every single print - it's not worth losing that much expensive filament!
For low temperature filaments, like PLA, we've experienced 50+ prints on a single coating -- so if you're printing PLA, one coating should last a good while!
Interested? Learn more about fine-tuning your 3D print jobs. Check our Vision MIner blog for more updates, and visit our YouTube channel for videos!
Vision Miner staff specialize in FDM/FFF 3D printing with high-performance plastics like PEEK, ULTEM, PPSU, PPS, CFPA.
Interested to see if your business could use functional 3D printing? Let us help you make the right choices for your needs!
Call us: 833-774-6863, or email VisionMiner.com
[ Ссылка ] At Vision Miner, we specialize in Functional 3D printing, especially high-performance plastics like PEEK, ULTEM, PPSU, PPS, CFPA, and more. We also have extensive experience with 3D scanners, and a whole array of solutions available for purchase. If you're interested in using functional 3D printing and materials in your business, feel free to reach out, and we can help you make the right choice for your application.
Call 833-774-6863 or email contact@visionminer.com, and we're here to help!
Follow Us
►Facebook: [ Ссылка ]
►Instagram: [ Ссылка ]
►Twitter: [ Ссылка ]
►TikTok: [ Ссылка ]
How To Use Nano Polymer Adhesive for 3D Printer Bed Adhesion
Теги
3d print not sticking to bed3d print stick to glass3d print sticking to raft3d printing bed adhesionabs bed adhesionasa bed adhesionbed adhesionbed adhesion testnylon bed adhesionpeek 3d filamentpeek bed adhesionpei bed adhesionpetg bed adhesionpp bed adhesionpps bed adhesionppsu bed adhesionultem bed adhesionPLA bed adhesionfilament bed adhesionbed adhesion problemsglass bedultem filamentadditive manufacturingpeek filament
