Click for more info and reviews of this Performance Tool Hand Tools:
[ Ссылка ]
Check out some similar Hand Tools options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Jeff: Hello everybody, this is Jeff at etrailer.com. Today we're taking a look at this 100 piece SAEN Metric Socket and Bit Drivers Set, in this nice storage case. What I'm going to do here is we're going to lay this down and open it up so we can go through the contents of it. So you know how it fits all in this nice storage case.So we're going to zoom in here and basically what we're going to start with, it'll come with two different size ratchets. It's got the 1/2" drive ratchet right here and then you have your 3/8" drive ratchet right there. Down here it comes with a three eight inch drive U joint.
You can see that'll allow you to get into many different positions, and right up here it has a 3/8 inch drive, three inch long extension. Does also give you two reducing adapters right here. This one here is the half-inch female and 3/8 inch male reducing adapter. And this one right here is a 3/8 inch female and a quarter inch male reducing adapter.Now on the sockets if we go at the top row right up here, there's going to be 15 3/8 inch drive six point sockets, and the sizes they'll range in the SAE sizes, 3/8 inch to three quarter inch SAE sizes. And they go in 1/16th of an inch increments.
In the metric sizes they'll cover 10 millimeters to 18 millimeters, and they go in one millimeter increments.Now right in the middle here, the smaller versions, we have the 18 of the quarter-inch drive six point sockets, and the sizes they'll use in the SAE sizes, they'll be five 30 seconds to 3/8 of an inch. And they go in one 30 seconds of an inch increment. And in the metric sizes, they go four millimeters to 10 millimeters sizes in a half inch millimeter increments.On the side of it there's eight 3/8 inch drive deep sockets. You can see right here and in the SAE sizes they'll go from 3/8 of an inch to 9/16th of an inch in 1/16th inch increments. And then the metric sizes they'll go from 10 millimeters to 13 millimeter sizes in one millimeter increments.
And then right down here, five here and five here, there's 10 half inch drive six point sockets. And in the SAE sizes they'll go from 5/8 inch to 7/8 of an inch in 1/16 inch increments. And in the metric size, they'll go from 14 millimeters to 19 millimeters metric sizes in one millimeter increments.Does also come down here with a magnetic hex bit driver. And over here, you can see it comes with the 22 different size one inch bits and they do offer the slotted size, five 30 seconds to 5/16th of an inch SAE sizes in one 32nd increments. They'll also offer Phillips number one, number two, number three size.
The pozi drive size number one, number two, and number three size. The star hex bit, T15, T20, T25, 27, T30, and T40. And in also the hex size five 30 seconds, three 16th, seven 30 seconds in a quarter of an inch, and you can see they're all in the bit holders. Holds it all into place.And then right down here, you can see it offers you 16 different heck ring sizes on the rings. Gives you eight SAE sizes of 1/16th to one quarter of an inch and eight metric sizes of one and a half millimeters to six millimeters. And as you can see, it's all fits nice in this nice molded storage case. Everything clicks into place and put that down in there. And with those down in there you could just close it up, latch it. There's two latches here and then it allows you to carry it around everything in one place.But that should do it for the review on this hundred piece SAE and Metric Socket and Bit Driver set in the nice molded storage case.
Ещё видео!