Today I have a small demo using Noisy Oscillator from Modor, Vibrazum Filterfrom Patching Panda and Lifeforms Micro Sequence from Pittsburgh Modular.
For EG used Minimod Contour Generator from AJH Synth and add delay from Euro DDL from Eventide.

Modor- Noisy Oscillator module is and oscillator that mixes two signals: a 'regular' wave (sawtooth / square / triangle) and a 'tonal noisy' wave. This adds a special noisy layer over the sound, that adds 'air', grit or dirt, depending on the combinations you make. The MOD parameter acts on the noisy waveforms:

Sonar Noise: a white noise filtered by a resonant bandpass filter, with 1V / oct tracking of the filter frequency. The MOD parameter controls the resonance.
Wind Noise: white noise filtered by a comb filter, with 1V / oct tracking of the base frequency (delay). The MOD parameter controls a 6dB / oct hipass filter.
Arcade Noise: LFSR noise source as can be found on the SID soundchips (Commodore) or Sega Arcade games. The MOD parameter controls again a 6dB / oct hipass filter.

The noisy wave can be set equal, or 1 or 2 octaves above the regular wave.
The module has two voices, with their own set of CV and output connectors. This can be used to play in a full 2-voice polyphony, or in a 2-voice unison. The outputs can be separate, using both output connectors, or mixed, using only the connector of the second voice.

Next to the 1V / oct pitch CV, the module offers CV control over pitch (FM), the MOD parameter and the sound level:

FM CV: pitch control normalized to 0V, attenuated with the FM knob (+ and -). This allows for Frequency Modulation up to the lower audio range. It's of course a digital module, so higher frequencies can start inducing aliasing and digital artefacts.
MOD CV: CV control for the MOD parameter, normalled to 0V and attenuated with the CV AMT knob (+ and -).
LEVEL CV: CV control for the sound volume, normalized to 7.5V. With this CV control you can omit an external VCA stage if you want.

The CV signals of the second voice (upper row of connectors) are always normalized to the signal of the first voice (lower row), so you can use a single LFO for some FM vibrato or tremolo on both voices, for example. Only the V / oct connector of the second voice is normalized to the first voice with an extra addition of a fixed voltage that can be set using a trimmer at the backside of the module. This way you can use the 2 voices to play in unison with a fixed pitch separation you can set on the backside.

[ Ссылка ]

Complex Multi-Filter

A triple, voltage-controllable, filter capable of subtle to extreme tone shaping. The three channels have dedicated outputs, as well as a mix output with individual level controls. It was designed to create movement to the sound thanks to many voltage control inputs. Each channel is able to sweep through all the frequency spectrum. A dedicated shift control with attenuverter cv input is able to swap all 3 filtres at the same time. The Vibrazum shines at high feedback with 24dB slope, the resonance is very creamy and full of rich harmonics from a gnarly tone-shaping tool of sonic destruction to vowel robotic sounds.

[ Ссылка ]

Versatile 8 Step Programmable Sequencer

Hands-On Sequencing
With a simple, performance focused interface, the feature set of the Lifeforms Micro Sequence module speaks for itself. Eight sliders with integrated channel mute. Eight quantized scales. Eight sequencer direction modes. Sequences up to 8 steps. Four external modulation functions. Integrated tap tempo clock. Eight step external clock divider. Run / Stop transport button. Sequence reset button. Dedicated analog CV output. And more ....

Full List of Features
8 Step Sequencer
8 Dedicated Channel Sliders with Integrated Mute
Independent Quantized Pitch and Analog CV Outputs
8 Quantized Scale Options (Micro Tuning, Chromatic, Major, Minor, Blues, Phrygian, Lydian, Dorian Scales)
8 Sequencer Direction Modes (Forward, Reverse, Pendulum, Stagger, Skip, Transpose, Random, Random With Rest)
Assignable Pattern Length From 1 to 8 Steps
Modulation Gate Input Assignable to One of Four Functions (Reset, Hold, Reverse, Ratchet)
Internal Tap Tempo Clock
8 External Gate or Trigger Clock Divider Options (÷ 1, ÷ 2, ÷ 3, ÷ 4, ÷ 5, ÷ 6, ÷ 7, ÷ 8)
4 Octave Quantized Pitch Output Range
0 to 5 volt Analog CV Output
5 volt Gate Output
5 volt Tap Tempo Clock Output
Run / Stop Transport Button
Pattern Reset Button

[ Ссылка ]

All modules mounted in the case RackBrute 6U from Arturia.

more info about this case here: [ Ссылка ]

#modoreurorack #vibrazumv2 #lifeformsmicrosequence #pittsburghmodular #patchingpanda #ajhsynth #eurorackmodular #eventideeuroddl #noisyoscillator #patchingpandafilter #multifilter #modularsynth #euroracksynthesizer #modular #minimod #dawless #arturia #rackbrute6u

свернуть