I have made this video after several requests asking how I drill holes in resin to add hooks etc. I have also shown how easy it is to sand sharp edges and remove bubbles and blemishes from resin as well as using the polishing wheel. Once this is done it is easy to re-coat the piece with another clear coat of resin. This will then give you a nice smooth blemish free piece of work. Using the Dremel 4000, or a similar tool is very easy and ideal for the resin beginner. The drill and the sanding cuts through the resin like a hot knife through butter, so go gently with a light touch . Please ensure that anytime you are sanding, drilling or polishing resin that you have a suitable MASK on to prevent you from breathing in the fine resin particles, as these can be bad for your health and lungs. I hope that you find this video useful, please let me know in the comments for this video if you have any tips or tricks you would like to share for polishing drilling or sanding.

CHANNEL MEMBERSHIP is available to everyone. Membership comes with a lot of additional perks including members only live streams and a VIP Facebook group alongside, support for anyone at any level of their resin journey to benefit from, plus more. Check out the perks by clicking the JOIN button or the link below. There is no obligation when you click the JOIN button next to the subscribe button to get access to these perks: [ Ссылка ]
OR
If you would like to buy me a coffee or make a much-welcomed donation towards the cost of materials, you can through this link 😍 Every contribution is very much appreciated and allows me to keep making regular videos. [ Ссылка ]
Check out this video next:
Steve 😍

Although I often talk about health and safety in my videos, please make sure you do your own research and take the relevant precautions to ensure that you are protecting your health. I am not responsible for anyone using resin and not taking the correct safety precautions. Resin is a chemical and as such should be always treated with respect and the manufacturers safety advice taken.

Links for USA (only)

Jewelry Chain 33 feet: [ Ссылка ]
Jumbo Craft Sticks: [ Ссылка ]
Open backed bezels: [ Ссылка ]
Closed Back Bezels: [ Ссылка ]
Epoxy Resin: [ Ссылка ]
Disposable Gloves: [ Ссылка ]
Mica Powder: [ Ссылка ]
Art Resin: [ Ссылка ]
Gold Acrylic Paint: [ Ссылка ]
Resin Mixing Jugs: [ Ссылка ]
Large Reusable Mixing Jugs: [ Ссылка ]
Micro Glitter: [ Ссылка ]
Half mask filter: [ Ссылка ]
Blow torch: [ Ссылка ]
Heat Gun: [ Ссылка ]
Eye protection: [ Ссылка ]
Resin Moulds: [ Ссылка ]
coaster molds: [ Ссылка ]
Resin Pigment paste: [ Ссылка ]
Alcohol Inks: [ Ссылка ]
Dremel 4000: [ Ссылка ]

Links For UK (only)

Dremel: [ Ссылка ]
MDF Boards: [ Ссылка ]
Open Backed Bezles: = [ Ссылка ]
Closed backed bezels: = [ Ссылка ]
Jumbo lollipop sticks: = [ Ссылка ]
Master Cast 1-2-1 epoxy resin (4kg) = [ Ссылка ]
Crystal Clear Bubble free epoxy resin: = [ Ссылка ]
Disposable gloves: = [ Ссылка ]
Mica Powder: = [ Ссылка ]
Art resin 946ml: = [ Ссылка ]
Gold acrylic paint: = [ Ссылка ]
Reusable Resin mixing cups: = [ Ссылка ]
Reusable silicone mixing jugs: = [ Ссылка ]
Micro Glitter: = [ Ссылка ]
Half mask filter: = [ Ссылка ]
Blow torch:= [ Ссылка ]
Heat Gun: = [ Ссылка ]
Eye protection: = [ Ссылка ]
Resin Moulds: = [ Ссылка ]
coaster molds: = [ Ссылка ]
resin Pigment paste (great value and lasts ages): = [ Ссылка ]
Alcohol Inks: = [ Ссылка ]

свернуть