This morning we returned to a reported vinyl pool leak in Chincilla. We re inspected the previous leak site and removed the solar suction bracket and puttied over the cover plate screw hole in the vinyl. We supplied and installed two new brackets before applying an epoxy bead around the new coverplate. We repeated this on the other solar suction. We noted the other solar suction was not drawing dye thru the screw hole. We then puttied over all the screw holes. We then removed, inspected and dye tested all the penetrations namely the solar returns, returns, light fittings, skimmer boxes, skimmer flaps, skimmer tile face, tiled steps and plastic bead . We then used the Leaktrac 2400 to retest the vinyl walls and floor. We then inspected below the in line waste shut off valve.
[ Ссылка ]
