Ramp Start Tutorial Steps,
INITIAL STEPS
1.set park brake
2.electric to main power
3.ext lights panel
master sw to norm
anti collision light on
position light to bright and set them to flash
4.set master fuel on
set eng feed to normal
5.epu set to normal
6.fuel qty select is set to normal
7.set air source to normal
ENG start
1.throttle set to idle
2.jgs start set to start2
3.check rpm 20% advance throttle midway
4.toggle idle detent shift-i
once 30% return throttle to idle engine should continue to spool 70%
5.check jfs switchedoff
if not switch it off manually
6.hyd oil warn light will go off automatically somewhere 25% to 70% rpm
verify lights are off
AVIONICS POWER
1.on panel G
switch on fcc,sms,ufc,mfd,gps,dl
2.set ins align to normal 8mins to to establish alignment
3. panel f
power on left , right hard points turn on fcr
set radar alltimeter rdr alt to stby
5.sym knob to turn on HUD
6.check ins status on ded at 10.0 fully aligned
7.look panel f
check no flag on on ADI, VVI or AOA
8.check panel A for trim is reset
9.adjust audio vol
COM1, COM2, MSL and threat audio
10.power on EWS set threat warn aux, ews, pwr, ews jmr, ews chaff, ews flares, to on
then switch ews mode to man
arm ejct seat
11.once INS is fully aligned switch to NAV
cap lock key to speed things up
12. set RDR ALT to on
13. switch landing lights to on parking brake to ON
14.enable nws to taxi shift-/
press T to request taxi to runway by atc
navi gate to runway use maps
IMPORTANT KEYS
to control plane in air press shift+ctrl+arrow keys on keyboard
for better results use a joypad or joy stick to fly otherwise we can fly with keyboard but shift+ctrl+arrow keys will be used and it is a bit difficult to manage things in falcon game
when nose wheel steering is on below 60knots
shift+ctrl+arrow keys control your plane
+,- For Throttle advance and retard
k For Brakes
Shift+/ For Nose Wheel Steerting
Shift+i For Throttle idle location
2 For 2D Cockpit view
3 For 3D Cockpit View
9 Outside longitudinal view
0 For outside view
8426 on numeric keys for view rotation
1 and 7 for view zoomin and zoomout
if things go nasty then do ....
Ctrl+e long press for ejection
click right mouse button and move mouse to move head in 3D cockpit view
shift+ctrl+alt+c to change HUD display color
press 2time caps lock for fast time important during 8mins of INS alignment
Esc For Ending the simulation
T For ATC Call for taxi
Please Like and Subscribe , Also Checkout my Facebook page
Bandit@Banditblast
Thanks i will do some more comprehensive tutorial videos
showing all step by step keymaps thanks.......
Please support my small channel to grow message and comment me thanks.......
