This custom lens re-housing is optimized for "Helios-44-2 58mm f/2 (M42 mount)".
The history, features and specifications of this famous Russian lens are very well known, so there is no need to add a description.
This lens housing has a front diameter of 95mm and the focal gear is also applied with a 0.8M standard gear pitch applied to cinema lenses. (Focus & aperture gear Outer diameter 81.6mm / 100T) The design of this lens housing is more convenient to use in combination with a follow focus device. It can be a little inconvenient to operate the focus ring by hand.
Designed to be secured using M4 standard grub screws (22 pcs.) and M4 *12mm standard screws(4 pcs). The filter step-up ring used on the front is designed for easy use of regular circular filters. (Front standard filter mounting screw, maximum 82mm, variable ND filter can be used up to 77mm)
I'm tired of repeating similar modeling every time, so I'd like to apply experimental and practical ideas one by one. (Of course, it can be roughly finished as a side effect.)
This time (some lenses that have trouble connecting and using polarizing filters or matte boxes due to the rotation of the front of the lens) I wanted to try a design that improves the lens front so that it does not rotate. (Helios-44-2 is not this type of lens, but there is currently no suitable lens in my list of lenses) and I also considered a lens housing in a way that is not affected by the length change of the front of the lens due to the focusing operation. This is not an inner focus lens structure in an optical sense, but it can be expected to play a role in mitigating changes in the length and center of gravity of the lens according to focusing operation.
File sharing is for sharing ideas. Use it for personal use only. Commercial use is not permitted.
Refer to the link below for more information and print file (STL)
[ Ссылка ]
If you found my designs useful, please donate what you think it is worth to my paypal.me. Your donation will be useful for a new housing design on a variety of lenses.
[ Ссылка ]
이 맞춤형 렌즈 리 하우징은 "Helios-44-2 58mm f / 2 (M42 마운트)"에 최적화되어 있습니다.
이 유명한 러시아 렌즈의 역사, 기능 및 사양은 매우 잘 알려져 있으므로 설명을 추가 할 필요가 없습니다.
이 렌즈 하우징은 전면 직경이 95mm이고 초점 기어도 시네마 렌즈에 적용된 0.8M 표준 기어 피치로 적용됩니다. (초점 및 조리개 기어 외경 81.6mm / 100T)이 렌즈 하우징의 디자인은 팔로우 포커스 장치와 함께 사용하는 것이 더 편리합니다. 초점 링을 손으로 조작하는 것은 약간 불편할 수 있습니다.
M4 표준 그럽 나사 (22 개) 및 M4 * 12mm 표준 나사 (4 개)를 사용하여 고정되도록 설계되었습니다. 전면에 사용되는 필터 스텝 업 링은 일반 원형 필터를 쉽게 사용할 수 있도록 설계되었습니다. (전면 표준 필터 장착 나사, 최대 82mm, 가변 ND 필터는 최대 77mm까지 사용 가능)
매번 비슷한 모델링을 반복하는 것이 지겨워 실험적이고 실용적인 아이디어를 하나씩 적용하고 싶습니다. (물론 부작용으로 대충 마무리 할 수 있습니다.)
이번에는 (렌즈 앞면이 회전하여 편광 필터 나 매트 박스를 연결하고 사용하는 데 문제가있는 일부 렌즈) 렌즈가 회전하지 않도록 전면을 개선하는 디자인을 시도하고 싶었습니다. (Helios-44-2는 이런 유형의 렌즈가 아니지만 현재 제 렌즈 목록에 적합한 렌즈가 없습니다) 그리고 렌즈 전면의 길이 변화에 영향을받지 않는 방식으로 렌즈 하우징을 고려했습니다. 초점 조작으로 인해. 광학적으로는 이너 포커스 렌즈 구조는 아니지만, 포커싱 동작에 따른 렌즈의 길이와 무게 중심의 변화를 완화하는 역할을 할 것으로 기대할 수 있습니다.
파일 공유는 아이디어를 공유하기위한 것입니다. 개인적인 용도로만 사용하십시오. 상업적 사용은 허용되지 않습니다.
추가적인 정보 및 인쇄 파일 (STL)은 아래 링크를 참조하십시오.
[ Ссылка ]
#MountainBreezeStudio
#Helios
#Lens_Rehousing
![](https://i.ytimg.com/vi/YjTHNZ8aTyg/maxresdefault.jpg)