Features and Benefits
Improved Travel Stop - Allows the actuator to stop off the pinion rather than the pistons. The standard actuator will have 100 degrees of travel with +5 or -5 degrees of adjustment on the open and close stop. The forged steel travel stop can be machined to any length of travel.
New "Top Hat" Thrust Bearing Design - The thrust bearing provides the largest pinion bearing surface in the industry. This upgraded thrust bearing limits friction between the actuator body and pinion, increases durability by absorbing side-load forces, and extends the cycle life of pinion O-Rings.
Increased Tooth Engagement - A minimum of two teeth are engaged at all times during the stroke for consistent torque output and accuracy.
Coating Options:
- Anodized type II
- Hard Anodized type III
- Anodized type II/epoxy polyester powder coat
- ANI (High Phosphorous Nickel Impregnated)
- Anodized type II or III/PTFE sealed
Available Options:
- 120°, 135°, and 180° rotation in double acting and spring return
- Low and High temperature options
- Fast acting/quick exhaust
- 100% travel stop adjustment
- 3 position actuators
Mounting Options:
- 3.25" and 5" bolt circles along with "Double D" and keyway pinions available for direct valve automation.
[ Ссылка ]
(770) 446-7074
![](https://i.ytimg.com/vi/Z6nMt-cIxpI/maxresdefault.jpg)