Tutorial for setting up your sound system and XR18 / X Air for aux fed subs. Midas MR18 aux fed subs method uses identical setup information as found in this video.
Aux Fed Sub Method
Software used for mixer control: Behringer X-Air Edit (available for free download from Behringer site)
This installment is a bit of a long one with all of the discussion of audio bus sends, crossover networks, DSP, amplifiers, and active and passive speakers. I did this video in three sections that are broken down into:
0:00 Intro
0:20 Setting Up The XR18 For Aux Fed Subs
6:12 Setting Up The Speakers/Amps For Aux Fed Subs
11:46 Tips And Advice For Mixing On Aux Fed Subs
Amazon Affiliate Links-
Behringer XR18 on Amazon:
[ Ссылка ]
Midas MR18 on Amazon:
[ Ссылка ]
Behringer X32 on Amazon:
[ Ссылка ]
Midas M32 on Amazon:
[ Ссылка ]
Stellar XT (Narration) Mic on Amazon:
[ Ссылка ]
If you're familiar with the concept of mixing aux fed subs on an analog console, then the first section might be all you need. It explains how to setup the console for mixing on Aux fed subs, and once you have that complete, everything else should be the same for you. Although, parts two and three might make for a good refresher.
If you're wanting to try aux fed subs and have no experience with the concept, then you'll probably find all 3 sections informative. The second section explains various system interconnect issues , for your amps and speakers. Also I address some differences between how you would do this on a Behringer X32 / M32 versus some limitations with the X-Air series.
Amazon Affiliate Links for amps, adapters, and speakers:
XLR Y Cable on Amazon:
[ Ссылка ]
(GLS Audio 6 Inch Patch Y Cable Cords - XLR Female to Dual XLR Male Cables - 6" Y-Cable Cord Splitter XLR-F to Dual XLR-M)
Behringer Amp with DSP:
[ Ссылка ]
Crown Amp with DSP:
[ Ссылка ]
Yorkville Powered Sub with 21" Woofer / Speaker:
[ Ссылка ]
Yorkville Powered Sub with 18" Speaker:
[ Ссылка ]
Yorkville Powered Subwoofer with 2x15" Speakers:
[ Ссылка ]
The third section is pointing out some tips, and also pitfalls to be careful of, when mixing on aux fed subs. As pointed out in the video, if you're recording post-EQ or doing a stream feed, there are a couple of things to be extra aware of.
As always, if there are any questions, comments, or suggestions please comment in the comment section.
Suggested related video:
5 Typical Mistakes Behringer XR18 and Midas MR18 Users Make:
[ Ссылка ]
I've created some playlists for these Behringer and these Live and Recording Audio Production Tips / Tutorials-
Behringer XR18 / X Air Tutorials:
[ Ссылка ]
Behringer X32 / Midas M32 Tutorials:
[ Ссылка ]
Alan's Live Production Tech Tips and Info:
[ Ссылка ]
Live Sound Questions and Answers Facebook Group:
[ Ссылка ]
#XR18
#BehringerXAir
EV Subwoofer Arrays - A Practical Guide
[ Ссылка ]
~~~~~~~~~~~~~~~~~~~~~~
Script files and other tutorials and info in PDF format as well as scene and library files at the Patreon Page.
Patreon Page:
[ Ссылка ]
Video is about live sound reinforcement - Aux fed subs technique. Information and tips for Behringer XR18 setup and sound system setup and prep for using aux fed subs. Uses include concert sound, club sound, church sound, etc..
-~-~~-~~~-~~-~-
Please watch: "5 Tips For Better Live Vocal Mixes - Mixing Live Vocals - Live Sound Tutorial on Behringer X32 XR18 "
[ Ссылка ]
-~-~~-~~~-~~-~-
"As an Amazon Associate I earn from qualifying purchases."
Aux Fed Subs Setup For Behringer XR18 X-Air - Midas MR18
Теги
Aux Fed Subwoofer XR18Aux Fed Subs Methodmidas mr18aux fed sub techniqueAux Fed Subwoofer SetupAux Fed Subwoofer X32behringer subwoofer setupXAir XR18Behringer XR18 tutorialBehringer XRX-Air EditMidas MR12x-airBeringerLive Audiobehringer xcontrolBerhingerBehringer XR12X-air tutorialLive Soundsound reinforcementsound reinforcement trainingchurch audioChurch soundlive mixingdigital mixerSubwoofer tutorialSubwoofer setup