Create your 3D print time-lapse using Octolapse. Octolapse is designed to make a stabilized time-lapses of your 3d prints and straightforward.
Octolapse moves the print bed and the extruder to its position before taking a snapshot. Snapshots can be taken at each layer change, at specific height increments, after a period of time has elapsed, or when certain GCodes are detected.
Now you can create a seamless time-lapse without custom camera installation, and no GCode customization is required.
📝 Tutorial: [ Ссылка ]
🔧Hardware :
1️⃣ Raspberry Pi 4 Model B
[2GB] [ Ссылка ]
[4GB] [ Ссылка ]
[8GB] [ Ссылка ]
2️⃣ 16GB Micro SD Card [ Ссылка ]
3️⃣ Official RPi 15W (5V/3A) PSU USB C UK Plug-Black: [ Ссылка ]
4️⃣ USB Micro B Cable: [ Ссылка ]
5️⃣ Raspberry Pi Camera: [ Ссылка ]
6️⃣Raspberry Pi 15-pin Camera FFC Cable - 1 meter: [ Ссылка ]
Raspberry Pi Camera Stand: [ Ссылка ]
#OctoPrint #Octolapse #3dprinter #RaspberryPi
🧕👩🎓👨🎓
If you are a student, register here:
[ Ссылка ]
👨🏻🏫👩🏻🏫
If you are a teacher, register here:
[ Ссылка ]
Reference: [ Ссылка ]
Suad Anwar,
Cytron Technologies.
Ещё видео!