To adjust the temperature setpoint on a MYPIN TA4 (or other T-Series PID Controller:
1. Press the blue "((/M" or "((/AT" button to enter the Parameter Setting Mode. The actual label depends on the model of PID Controller.
2. The last digit of the setting should blink indicating you are in Parameter Setting Mode.
3. Press the blue "((/M" or "((/AT" button to move to other digits.
4. Use the green"^" or "v" buttons to adjust the digit's value as need.
5. Press the yellow "SET" button to finalize the adjustment.
Ещё видео!