The tutorial applied to RC6GS V3 and RC4GS V3.
TIMER function introduction:
There are 2 modes: UP TIMER and DOWN TIMER. UP TIMER means the timing number will count from zero to big number. DOWN TIMER means the timing number will count from big number to zero.
ALARM means alarm time, which defaults to 8 minutes. When the timing reaches the set time, the transmitter starts to alarm.
Here START and STOP means you can set a switch to trigger or stop timing. You can set it to NULL, SWA, SWB, SWC, SWD or their lock modes LK-A, LK-B, LK-C, LK-D, and throttle. NULL means the function is not enabled.
The position of the switch can be set to DOWN, CENTRAL or UP.
RESET means all the timing values are cleared.
LAP is the number of running laps that you need to record. 30 laps can be set at most.
DISP:
CURRENT means the timing is only displayed in the function menu of "Timer".
HOME PAGE means the timing will also be displayed in the home page. Return and check it. You can also control the timing in the home page.
For more details of RC6GS V3:
[ Ссылка ]
Purchase link of RC6GS V3:
[ Ссылка ]
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.
