Nowadays, induction cookers are being widely used all over the world. However, there are still some people who do not understand the internal structure of induction cookers.

In this video, I will introduce you a step-by-step tutorial, through which you can easily assemble your favorite induction cooker.

How to disassemble a counter top induction cooker?

Steps:
(1) 将炉身翻转至背面
Turn the commercial induction cooker upside down
(2) 用十字螺丝刀将四周固定螺丝拆除
Remove the surrounding fixing screws with a plillips screwdriver
(3) 将炉身翻至正面，从正面向上打开
Flip-up the commercial induction cooker and open it from the front
(4) 用十字螺丝刀将线圈线材螺丝拆除
Dismantle the screw which connected the wire and the cover
(5) 将机芯PCB控制板线材拆除
Take down the PCB control board wire
(6) 取下顶盖并放好
Drop and place the cover
(7) 将机芯保护盖固定螺丝拆除
Detach the fixing screws from the protective cover
(8) 小心取出保护盖
Carefully remove the protective cover
(9) 用内六角螺丝刀将机芯PCB板固定螺丝拆除
Remove the fixing screws of the PCB with an imperial nut screw drive
(10) 将机芯取出
Take out the PCB module
(11) 用内六角螺丝刀将风扇固定螺丝拆除
Remove the fixing screws on the fan
(12) 拿出前板并翻转至底部朝上
Flip the induction cooker cover up with the bottom facing
(13) 用斜口钳剪断线材固定扎带
Cut the cable tie with diagonal pliers
(14) 再用内六角螺丝刀拆除线盘固定螺丝
Detach the screws fixed the coil with an imperial nut screwdrivers
(15) 拿出线盘并放好
Take out the induction coil
(16) 最后，用内六角螺丝刀拆除PCB控制面板固定螺丝即可
At last, remove the screws on the PCB control panel

свернуть