FLEX SEAL® LIQUID starts out as a thick liquid and dries to a super strong, flexible, watertight rubberized coating. FLEX SEAL® LIQUID can be brushed, rolled, dipped or poured to create a high performance protective rubber barrier that blocks out air, water and moisture on a variety of surfaces and objects. Once cured, FLEX SEAL® LIQUID forms a durable, breathable, weatherproof, non-slip barrier that’s resistant to rain, snow, sun, wind, hail, air, moisture, UV degradation, extreme temperatures and natural weathering.
Buy Now: [ Ссылка ]
Features:
- Brush, Roll, Dip or Pour
- Seals Out Water, Air & Moisture
- Prevents Rust & Corrosion
- Covers Fast & Excellent Adhesion
- UV, Mildew & Chemical Resistant
- Stops Noise & Vibrations
- Expands & Contracts
- Can Be Painted Any Color
Use Flex Seal® Liquid With:
- Basements & Foundations
- Tools & Sporting Equipment
- Fish Ponds & Pool Liners
- Fountains & Bird Baths
- Water & Rain Barrels
- Roofs & Gutters
- Chimneys & Flashings
- RVs & Campers
- Auto Restoration
DIRECTIONS:
To insure you apply Flex Seal® Liquid correctly follow the below steps:
1. Make sure the surface is clean, dry and free of grease, oil and dirt.
2. Increase adhesion by etching surface with sand paper.
3. You can either brush, roll, dip or pour directly onto surface.
4. Make sure to coat entire surface until all cracks and holes are completely filled.
5. Apply additional coats as needed to increase thickness and to fill larger holes.
6. Allow each coat to dry completely before adding additional coats.
7. Allow 24 to 48 hours or more to dry.
