This time I´m restoring a Kingston watch.
It´s powered by the Poljot 2409 caliber, a hand-wind movement with 17 rubis and a shock protection. It beats with 18000 bph and the lift angle of the balance is 42°.

The watch is in bad condition: The case is full of green patina/rust and the plating is damaged, the glass is heavily scratched and the movement isn´t running at all. The mainspring seems blocked and the time-setting is not working.

The mainspring is unbreakable, thats what the dial says. But unfortunately not un-"bendable"... the mainspring is done and I need to replace that one as well as the sliding-pinion (all teeths are broken off).
I need to clean the case in acetic acid to remove the patina and re-polish it. The glass will be polished and the movement cleaned. The crown is damaged so i need to replace that one.

After everything is cleaned and polished, I can re-assemble the movement with some fresh oil. After that, this watch is in a good beat (+1 second per day) again.

I hope you liked this restoration, if so, like, comment and subscribe ;)

Subscribe to my channel:
[ Ссылка ]

Music:
"Lights" by Patrick Patrikios

___________________________________

Follow me on Instagram:
[ Ссылка ]

Facebook:
[ Ссылка ]

Patreon:
[ Ссылка ]

___________________________________

Acrylic Glass Polishing Compound: [ Ссылка ] **
Case Polishing Diamond Paste: [ Ссылка ] **
Case Polishing Wadding: [ Ссылка ] **
Thermo-Tape: [ Ссылка ] **
Fiber Glass Pen: [ Ссылка ] **
UV-Lamp: [ Ссылка ] **
UV-Glue: [ Ссылка ] **
Rodico: [ Ссылка ] **
Multi-Purpose Watch-Repair-Kit: [ Ссылка ] **
Multitool: [ Ссылка ] **
Buffing Wheels for Multitool: [ Ссылка ] **
My Camera: [ Ссылка ] **

** Affiliate Links
Disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission. This help support the channel and allows me to continue to make videos like this. Thank you for the support!

свернуть