For those who want to upgrade their car's weak horn and be heard. I got myself a set of HELLA Trumpet Horns ( [ Ссылка ] )! I will unbox and install these Hella horns on my car. If you don't want to deal with splicing wires or buying relays this is the diy video for you.
Btw, my Youtube vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For more Honda and car DIY ideas check out my Amazon lists:
Visit: [ Ссылка ]
I went with a Hella universal kit ( [ Ссылка ] ) and added a Honda Horn audio adaptor ( [ Ссылка ] ) . Some horn kits have Honda specific connectors for fast plug and play easy connecting without splicing wires Hella has some many of the car manufacture plugs ( [ Ссылка ] ).
The issue with kits with specific car manufacture specific plugs is the possibility of being positioned in the wrong side of the horn. Your car may not have enough wiring harness to connect the plug. This happened with my Honda Clarity as the cable did not reach the horn plug. It needed another 3 inches of original harness length.
Universal horn kits are more flexible as you can buy an adaptor cable specific for your Honda or other car manufacture. Typical adapter cables are about 3-4 inches in length. The universal horn kit I choose was the Hella Trumpet Hi / Low Horn 113dB - Universal Kit. They had Honda specific connectors but I got the universal fit.
I also ordered a Honda Civic horn adaptor( [ Ссылка ] )with 2 prongs to match my Honda Clarity. Some other model Honda have single prong as they ground from the mounting bolt to the metal of the car.
The only issue of my Hella Trumpet horns ( [ Ссылка ] ) and 1/4 inch terminals were larger than my 3rd party adapter. I had to make a F2 to F1 adaptor ( [ Ссылка ] ) , by using a 16 AWG 1/4" Female connector terminal from my terminal assortment kit ( [ Ссылка ] ) and some electrical tape. I typically use Plastidip in a can ( [ Ссылка ] ) to insulate my electrical terminals but the can dried out.
You will need a a flat head screwdriver for the plastic clips that cover the paneling, 12 MM socket for the mounting bolt, and a 10 mm socket wrench for adjusting the angle of the horn mount. After connecting the horn test it out prior to finishing up the cable management.
Enjoy your new louder horns!
Thank you for visiting and supporting SterlingW Youtube Channel!
Thanks for watching! Like, Subscribe, Leave a comment, and click the Bell button!
SOCIAL MEDIA:
Join me on Youtube: [ Ссылка ]
Instagram: [ Ссылка ]
Twitter: [ Ссылка ] ( @sterlingwong8 )
Website: [ Ссылка ]
Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , animals, pets, vehicles, and / or with tools seen or implied in this video. You should always check with your vet to all health matters with your pet and pet care. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong.
![](https://s2.save4k.ru/pic/_g0VIoo5SIs/maxresdefault.jpg)