GTT Mark III membrane system is a cryogenic liner directly supported by the ship's inner hull. This liner is composed of a primary metallic membrane positioned on top of a prefabricated insulation panel including a complete secondary membrane.
PRIMARY STAINLESS STEEL
The primary membrane is made of corrugated stainless steel 304 L, 1.2 mm thick. It contains the LNG cargo and is directly supported by and fixed to the insulation system. Standard size of the corrugated sheets is 3m x 1m.
SECONDARY TRIPLEX
The secondary membrane is made of a composite laminated material: a thin sheet of aluminum between two layers of glass cloth and resin. It is positioned inside the prefabricated insulation panels between the two insulation layers.
INSULATION
The insulation consists of a load-bearing system made of prefabricated panels in reinforced polyurethane foam including both primary and secondary insulation layers and the secondary membrane. The standard size of the panels is 3 m x 1 m. The thickness of the insulation is adjustable from 250 mm to 350 mm to fulfill any B.O.R. requirement. The panels are bonded to the inner hull by means of resin ropes which serve a double purpose: anchoring the insulation and spreading evenly the loads.
Please visit our corporate website: [ Ссылка ]
![](https://i.ytimg.com/vi/_lmMRu_pLsc/maxresdefault.jpg)