Thanks to PCBWay for sponsoring this video. Check out [ Ссылка ] for custom printed circuit boards, electronics, and rapid prototyping services (Use my referral link to get $5 of New User Free Credit) [ Ссылка ] !
LiPo BATERIES CAN BE CONFUSING!!!! But by the end of this video, you should be able to confidently purchase, charge, fly, and take care of a lithium polymer battery for your RC aircraft or vehicle!
Helpful resources:
Voltage chart: [ Ссылка ]
Connectors: [ Ссылка ]
C-rating: [ Ссылка ]
Inexpensive one-battery charger: [ Ссылка ]
A solid two-battery charging option [ Ссылка ]
*******
And here are the bullet points:
1. What the numbers/info on the battery mean
* Chemistry (LiPo) - (what kind of battery)
* Voltage (cell count) - (thrust/speed)
* Capacity — Milliamp hours - (flight time)
* C rating - (how quickly it can be charged and discharged) (Higher C rating will help give longer/more powerful "bursts" of thrust)
* Balance lead - (used for safe charging)
* Power lead - (main power connector to drone)
2. What to know when buying
* Connector type
* Voltage must match your specific need
* mAh does not need to be exact
3. what to know when charging
* Can burst into flame if overcharged
* ALWAYS balance charge
* Charge at a rate of 1C - (divide mAh of battery by 1000 to get the charge current in AmpHours) (1500mah x 1C = 1.5A or 1500mA)
4. what to know when flying
* Battery will be damaged if overdischarged
* If a battery is ruptured/damaged in a crash, it could catch fire
* Try to end flights with 20% charge left over (about 3.7V per cell)
* Don't fly with a battery that is very puffy or physically damaged
*******
Want to watch this video without youtube ads? you can over at RCwithAdam.com [ Ссылка ]
00:00 BLUF
2:43 What type of CHEMISTRY (LiPo)?
4:45 How many VOLTS (how powerful)?
5:03 What CAPACITY (how big)?
6:45 What is "C" rating?
9:57 Which type of CONNECTOR?
10:54 CHECK THESE 4 THINGS BEFORE BUYING A BATTERY
11:00 IMPORTANT SAFETY STUFF to know when CHARGING
17:09 What to know when FLYING
19:59 NO SAFETY PROTECTIONS
21:46 Storage charge after flying
-------------
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at [ Ссылка ]
Want to support RCwithAdam? ↴
KO-FI: [ Ссылка ]
OR
PATREON: [ Ссылка ]
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
**DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!**
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #fpvdrone #DJI
![](https://s2.save4k.ru/pic/_yCosS0XA94/maxresdefault.jpg)