This cheap and easy DIY project is fairly beginner friendly with minimal tools and materials. The total cost of this DIY Ice Bath/ Plunge Pool was £115. For the container and the timber. Perfect if you want an ice bath without spending a fortune!
Materials Used in this Project:
1x 1000 litre / 220 gallon IBC tank
7x Redwood 12mm x 100mm Tongue and Groove Cladding 4.8m
2x C24 Joists 6x2 (145mm x 47mm) - 3m
5x Roofing Battens - Treated (25 x 38mm)
Wood Treatment/Oil
Waterproof Cover: [ Ссылка ]
Tools Used to Complete this Project
Angle Grinder: [ Ссылка ]
Drill: [ Ссылка ]
Impact Driver (optional): [ Ссылка ]
Hammer: [ Ссылка ]
Caulking Gun: [ Ссылка ]
Mitre Saw: [ Ссылка ]
Or you can use a hand saw: [ Ссылка ]
Random Orbital Sander: [ Ссылка ]
MY FAVOURITE TOOLS & GEAR
Bargain Compressor - [ Ссылка ]
Cheap but actually surprising good Spray Gun (and kit) - [ Ссылка ]
Track saw [ Ссылка ]
Tracks [ Ссылка ]
Angle Grinder: [ Ссылка ]
'Dust Free' Sand Paper Discs: [ Ссылка ]
For the best and cheapest licensed music check out [ Ссылка ]
Some of the links in this description are affiliate links that may earn me affiliate payments. Any support for the channel is massively appreciated and allows me to keep making videos.
![](https://i.ytimg.com/vi/_zcM0Fp5GW4/maxresdefault.jpg)