Soy Yo @ 432hz Sarai Gonzalez, Liliana Saumet, Bomba Estéreo, Liliana Saumet Soy Yo @ 432Hz
Tuned to the scientific tuning (432Hz) using Cool Edit Pro 2.1. Not to be confused with the Pythagorean tuning. Why 432hz?
[ Ссылка ] or [ Ссылка ]
(To download any of the documents in this video or any other video Jamie Buturff published please go to www.spiritualresults.com and in the upper right hand corner on the home page click on 432Docs.)
How to tune your tracks to 432hz using the stretch effect in Cool Edit Pro 2.1 - [ Ссылка ] - or - [ Ссылка ] -
or use the change speed effect in Audacity which can be downloaded here: [ Ссылка ]
-----------------------------------------------------------------------------------------------------------------------------------------------------------
1. First import the track into Cool Edit Pro 2.1 by dragging music or video files file from your music folder into the CoolEdit Pro app. Or alternately go to File/Open/
2. Look at the curve: Analyze/Show Frequency Analysis/
3. Adjust the curve: Effects/Filters/Parametric Equalizer/
(for after stretching or adjusting the speed the music will be 8 Hz lower..)
suggestions:
-select check boxes below Center Frequency:
-check box #4: 6200 Hz - width 4 - plus 4 to 6 dB
optional:
-check box #3: select frequency Hz - set widths to 20 - drag gray dot in the graph up and from left to right and back to select the desired tone to increase or suppress. After selecting the desired tone, set the widths back to somewhere between 2 and 4 and de dB slide to maximum plus or minus 6 dB.
suggestions:
-check box #2: 450 - 500 Hz or higher - width 4 - minus 4 to 6 dB
-check box #1: between 60 - 200 Hz or higher - width 2 - plus 4 to 6 dB
4. Adjust Volume: Effects/Amplitude/Normalize/100%
optional: adjust Effects/Amplitude/Hard Limiting the decrease peak levels.. Than Normalize..
5. Decrees 8Hz by stretching 1.818%:
-Effects/Time/Pitch/Stretch
-Set ratio to 101.8
-Check "Pitch Shift" to preserve tempo
-Check "Medium Precision
suggestions:
safe setting by clicking Add button above right corner.
-- By stretching the peak volume is cut if so levels won't go in the red-- :)
6. Save the new file by File/Save Copy As
- Select Windows PCM (*.wav) for a straight raw copy
- Select mprPRO (FhG) (*.mp3) for best mp3 version
click "Options" CBR (Constant Bitrate) Mp3,
Maximum Bandwidth etc,
select "Codec" High Quality Codec (Slowest)
--------------------------------------------------------------- Standard 440hz | Scientific 432hz ---------------------------------------------------
------------
For Audacity: A4 440hz x 98.182% = 432hz A4 G4 392hz x 98.182% = 384.87hz G4 A3 220hz x 98.182% = 216hz A3 A2 110hz x 98.182% = 108hz A2 Check here to see if it matches up: [ Ссылка ] Slowing the track down effects all of the frequencies. If the frequency is 110hz and you slow it down by 1.818% then its cycle will reduce down to 108hz and so on and so forth.
There is also no loss of quality here because you are not pitch shifting. There are new frequencies being added across the entire range.
New spacing between chords. This is why the track gets louder after you slow it down and why you have to lower the volume first to avoid clipping.
**If you liked this video please subscribe! **
.
Ещё видео!