Toyota Corolla Gli Manual gear oil change 75 w 90
toyota corolla gli gear oil change,
corolla manual gear oil change,
toyota corolla manual gear oil change,
toyota corolla 2006 gear oil change,
toyota corolla 2013 gear oil change,
toyota corolla altis gear oil change,
toyota corolla gear oil change,
toyota corolla gli automatic gear oil capacity,
toyota corolla 2014 gear oil change,
toyota corolla automatic gear oil change,
Changing the manual transmission gear oil in your Toyota Corolla Gli is an important part of regular maintenance to ensure smooth and efficient gear shifting. Here are the steps to change the manual transmission gear oil:
Tools and Materials Needed:
1. Jack and jack stands or ramps (for lifting the front of the car)
2. Socket set and ratchet
3. Wrench set
4. Oil drain pan
5. Funnel
6. New gear oil (Check your owner's manual for the recommended type and quantity)
7. Oil pump or squeeze bottle (for filling the transmission)
8. Oil drain plug washer or gasket (if necessary)
Steps:
1. Safety Precautions:
- Ensure the car is parked on a level surface.
- Apply the parking brake and chock the rear wheels.
- Wear safety goggles and gloves to protect yourself from oil splatter.
2. Lift the Car:
- Use a jack and jack stands or ramps to lift the front of the car, providing enough space to access the transmission.
3. Locate the Drain Plug:
- The transmission drain plug is typically located on the underside of the transmission case. Consult your owner's manual or refer to a repair manual to find its exact location.
4. Position the Drain Pan:
- Place the oil drain pan under the drain plug to catch the old gear oil.
5. Remove the Drain Plug:
- Using a socket set or wrench, carefully loosen and remove the drain plug. Be prepared for gear oil to flow out once the plug is removed. Allow the old oil to drain completely.
6. Inspect and Replace Drain Plug Washer or Gasket:
- Check the drain plug washer or gasket for wear or damage. Replace it if necessary to prevent leaks when you reinstall the plug.
7. Fill the Transmission:
- Attach a funnel to the filler hole on the side of the transmission case.
- Use an oil pump or squeeze bottle to slowly add the recommended gear oil until it starts to overflow from the filler hole.
8. Check for Proper Level:
- Some transmissions have a specific procedure for checking the oil level. Refer to your owner's manual for this information.
9. Reinstall the Drain Plug:
- Once the transmission is filled, clean the drain plug and the surrounding area.
- Reinstall the drain plug with a new washer or gasket, and tighten it to the manufacturer's specifications.
10. Lower the Car:
- Carefully lower the car to the ground.
11. Dispose of the Old Oil:
- Properly dispose of the old gear oil at a recycling center or an auto parts store that accepts used oil.
12. Double-Check for Leaks:
- Start the engine and check for any leaks around the drain plug and filler hole. If you see leaks, address them immediately.
13. Record Maintenance:
- Record the date and mileage of the gear oil change in your maintenance log.
Remember to consult your owner's manual for specific recommendations and torque specifications, as they may vary depending on the year and model of your Toyota Corolla Gli. If you're unsure about any step of the process or lack the necessary tools and experience, it's advisable to seek professional assistance or guidance.
