Roger looks at plastering over Artex to see how effective it is.

The art of plastering over Artex can seem like a daunting task to the uninitiated. However, with the right tools and techniques, you can transform your dated Artex ceiling into a sleek and smooth masterpiece. This guide will walk you through the steps you need to take to achieve a successful plastering over Artex project.

Understanding Artex:

Artex is a surface coating used for interior decorating, primarily for ceilings, and was widely popular in homes built between the 1960s and 1980s. The material is known for its textured and patterned finish. However, modern tastes lean towards sleeker, smoother finishes, so many homeowners look for ways to cover their Artex ceilings.

Preparation:

Before you begin, it's important to know that some older Artex can contain asbestos, a harmful material when its fibres are inhaled. If you suspect your Artex might contain asbestos, have it professionally tested and removed if necessary.

Next, gather the necessary tools. You will need a bucket trowel, a plasterer's trowel, plaster, a step ladder, protective sheets, goggles, a dust mask, and possibly a PVA bonding agent.

Procedure:

Safety First: Lay down protective sheets over your floor and furniture. Wear protective gear, including goggles and a dust mask, to avoid inhaling dust or getting plaster in your eyes.

Cleaning: Clean your Artex ceiling. This step will involve removing any dirt, dust, or grease from the surface. Use a brush or vacuum to clear any loose material.

Prepping the Ceiling: Apply a PVA bonding agent if needed. This depends on how porous the Artex is. If it's quite porous, applying a PVA mix can help the new plaster adhere better.

Mix the Plaster: Follow the manufacturer's instructions to create the right consistency. It should be a creamy texture that's not too runny nor too stiff.

Applying the Plaster: Start at one corner of the ceiling and work your way across. Apply a thin first coat of plaster using the plasterer's trowel. It's important to work quickly before the plaster begins to dry.

Smooth the Plaster: After you've applied the first coat, go over it again with your trowel to smooth out any lines or imperfections. You're looking for a flat and even layer.

Second Coat: Once the first coat is dry, repeat the process with a second, thinner layer of plaster.

Final Smoothing: After the second coat, use the trowel again to smooth out the ceiling. This may take a little time and patience, but the result is worth it.

Conclusion:

Plastering over an Artex ceiling can be a rewarding DIY project, and with this step-by-step guide, it should now feel more achievable. Once your ceiling is dry and smooth, you can paint and decorate as desired, giving your room a fresh, updated look. The world of smooth ceilings awaits you!

Remember to Like, Comment, Share, and Subscribe for more great DIY content. Let's get plastering and turn that old Artex pattern into a smooth, modern masterpiece!

==========================================
#diy #plastering #artex

🔗 Skill Builder Link Tree: [ Ссылка ]

👍 Tell us what you like: [ Ссылка ]

📪 Ask Skill Builder: [ Ссылка ]

🎥 TikTok: [ Ссылка ]

📣 Facebook: [ Ссылка ]

📷 Instagram: [ Ссылка ]

🛒 As an Amazon Associate, we earn from qualifying purchases

🎬 All videos: [ Ссылка ]

💧 We Support Charity Water: [ Ссылка ]

◾ Out of respect to our channel sponsors and the wide variety of people who watch our videos, we'll remove comments that do not follow common standards of politeness and decency.

свернуть