DIY Leather Stamp Plates for Embossing and Debossing with your laser engraver is very easy. I made my custom leather stamp debossing plates from 1/8" cast acrylic on my Bescutter Versa 52" x 36" 150W CO2 laser. The first pass was set to "Ramp" engrave with a speed of 250 mm/s and a Min/Max power of 15/40 percent. The cleanup pass was done with a speed of 350 mm/s and Min/Max power set to 15/15 percent.

► PATTERNS: [ Ссылка ]
► IN STOCK: [ Ссылка ]
► FOLLOW: [ Ссылка ]
► TOOLS & GEAR (affiliate links)

Laser Machine: [ Ссылка ]

Air Brush - Badger 150 Airbrush: [ Ссылка ]
Air Compressor - Senco PC1010 1-Gallon Air Compressor: [ Ссылка ]
Bone Folder: [ Ссылка ]
Brass Maker Stamps: [ Ссылка ]
Burnishing Gum (Gum Tragacanth): [ Ссылка ]
Burnishing Gum (Tokonole): [ Ссылка ]
Cardstock: [ Ссылка ]
Cocobolo Burnisher: [ Ссылка ]
Contact Cement (Barge): [ Ссылка ]
Contact Cement (Fiebling's - Non Toxic): [ Ссылка ]
Contact Cement (Weldwood - this is what I use): [ Ссылка ]
Cutting Mat: [ Ссылка ]
Dye: [ Ссылка ]
Edger (C.S. Osborne #125 Size 3): [ Ссылка ]
Edger (Weaver Size 0 = 1/16"): [ Ссылка ]
Fiskars Rotary Cutter: [ Ссылка ]
Gun Molds: [ Ссылка ]
How To Make Holsters, by Al Stohlman: [ Ссылка ]
Montana Acrylic Empty Marker: [ Ссылка ]
Punching Pad: [ Ссылка ]
Roughing Tool: [ Ссылка ]
Round Knife: [ Ссылка ]
Scratch Awl (Tandy): [ Ссылка ]
Scratch Awl (Kobalt): [ Ссылка ]
Sewing Needles: [ Ссылка ]
Snap Press: Pres-N-Snap [ Ссылка ]
Stitching Chisels: [ Ссылка ]
Stitching Pony: DreamFactory [ Ссылка ]
Straight Edge Ruler: [ Ссылка ]
Sewing Machine: [ Ссылка ]
Tandy Leather Craftool Adjustable Creaser: [ Ссылка ]
Vacuum Press: [ Ссылка ]
Wood Slicker: [ Ссылка ]
Wool Daubers: [ Ссылка ]

► LEATHER SUPPLIERS

Wickett & Craig - I typically order their "Tooling/Holster/Carving" vegetable tanned leather. I purchase their "Standard" grade, and I request that they split it down from a thicker hide so the back is as clean as possible. I normally order 7-8 ounce for holsters, 3-4 ounce if I'm lining a holster (I build the whole thing out of 3-4 ounce), and either 3-4 or 4-5 ounce for wallets, journal covers, etc... They will allow you to purchase individual hides

Herman Oak - While I love the leather I've gotten from Wickett & Craig, I prefer the warmer coloring of natural Herman Oak. Unfortunately, H.O. requires you to buy leather in bulk from the tannery, and buying from distributors can be hit & miss. Springfield Leather sells "Herman Oak Premium Belt Bend", so I’ve been using this lately.

The Leather Guy - I don't have a lot of experience with this leather, but the "Artisan's Choice" leather I've used has been very nice. The coloration is similar to Wickett & Craig. The thing I really like about The Leather Guy's website is that nearly every single hide shown on their site is a listing for the actual hide you'll be buying, complete with photos and a description of blemishes for that particular hide. Very cool that they do that!

District Leather - I've never personally ordered from them, but I've heard good things about their leather.

Acadia Leather - I've never purchased from here either, but I've also heard good things about their leather.

Horween Leather - At the risk of sounding repetitive, here's another I've never ordered from, but their leather is very well known.

Weaver Leathercraft - Most of what I order from weaver is buckles and tools, but they also sell leather.

► VIDEO EQUIPMENT (affiliate links)

Camera - Fuji XT4: [ Ссылка ]
Lens - Fujinon XF16-80mm F4 R OIS WR: [ Ссылка ]
Tripod - 62": [ Ссылка ]
Tripod - Travel Size: [ Ссылка ]
Tripod - Spare Release Plate Ball Head: [ Ссылка ]
Portable SSD: [ Ссылка ]

свернуть