Want to continue learning about engineering with videos like this one? Then visit:
[ Ссылка ]
 
Want to teach/instruct with the 3D models shown in this video? Then visit:
[ Ссылка ]
 
******************************************************************

This 3D animated video shows how a circular primary clarifier works. We look at all of the main components of the clarifier, how it works and the factors that influence its performance.

Like this video? Then check out our other videos!

🚢 Marine Diesel Two Stroke Engine - How it Works! - [ Ссылка ]
🚢 Ship Parts and Terminology Explained! - [ Ссылка ]
⚙️How Deaerators Work! - [ Ссылка ]
⚙️How Shell and Tube Heat Exchangers Work! - [ Ссылка ]
⚙️How Power Grids Work! - [ Ссылка ]
⚙️How Watertube Boilers Work! - [ Ссылка ]
⚙️How Dams Work (Hydro Dams)! - [ Ссылка ]
💡Control Valve Types (Gate Valve, Globe Valve etc.)! - [ Ссылка ]
💡Transformer Parts and Functions! - [ Ссылка ]
💡Plate Heat Exchangers Explained! - [ Ссылка ]

📚Want to learn more about engineering?
Then join saVRee to access over 45 hours of engineering video courses! New courses every month!
[ Ссылка ]

Hope to see you on a course soon! 👋

🏫Want to use the 3D model in this video to present, instruct, or teach? Simply join saVRee! We have over 400 engineering models that will make your life a lot easier!
[ Ссылка ]

📱Check out our socials!
[ Ссылка ]

📖You can learn more about engineering in our technical encyclopedia: [ Ссылка ]

▶️Introduction
Primary clarifiers are used to complete the process of sedimentation. Sedimentation is the process of separating suspended solids from a liquid. Separation without mechanical means can be completed within a sedimentation basin or settling tank, separation using mechanical means is completed using a clarifier.

Clarifiers are used in many water treatment facilities, as well as in the mining, paper and pulp, and sanitation industries. Clarifiers can be of the rectangular, sloped or circular design.

The purpose of the clarifier is to reduce the velocity of the influent in order to allow the suspended solids to separate from the liquid. Heavy solids are referred to as settleable solids and these accumulate on the bottom of the clarifier to form sludge. Lighter solids are referred to as floatable solids and these accumulate on the liquid surface to form scum.

Clarifiers have found widespread application because they are very effective and offer a good return on investment compared to other alternatives. A typical primary clarifier will separate between 90-95% of settleable solids from the liquid and 40-60% of suspended solids.

How It Works
Influent enters through the central pipe and is discharged to the centre of the clarifier. The influent velocity is reduced and settling occurs due to gravity. Heavier solids form sludge and are removed using rakes/ploughs. Lighter solids float on the top of the liquid and are removed by a scum skimmer. The cleaned liquid passes through a weir and into the effluent launder. The effluent is then extracted for direct discharge or further treatment.


Sources:
By 19ceic3004 - Own work, CC BY-SA 3.0, [ Ссылка ]
eCompendium of sanitation systems and technologies: [ Ссылка ]
Eawag: Swiss Federal Institute of Aquatic Science and Technology
Technical drawings: designport, Paolo Monaco, Zurich
See [ Ссылка ]
By User:Dantadd - Own work, CC BY-SA 2.5, [ Ссылка ]


#saVRee #PowerEngineering #IndustrialEngineering

свернуть