Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]
This video shows you how to install a lower control arm with ball joint on your 2005-2009 Subaru Outback. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2005 Subaru Outback
2006 Subaru Outback
2007 Subaru Outback
2008 Subaru Outback
2009 Subaru Outback
Tools you will need:
• Pry Bar [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Locking Pliers [ Ссылка ]
• Metal Cutters
• Torque Wrench [ Ссылка ]
• 9/16 Inch Wrench
• Anti-Seize Grease
• Chisel [ Ссылка ]
• Rubber Mallet [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Subaru Outback 2005-2009 3rd Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Ещё видео!