Everything you need to get started in vacuum press veneering. Brought to us by Squarespace. For 10% off your first purchase, go to: [ Ссылка ]
Take your woodworking to the next level with vacuum press veneering. Veneering allows you to get the most out of valuable woods and use plywood and MDF when you need to avoid expansion and contraction. Using a vacuum press will get you more pressure and more even pressure than clamps alone. A vacuum press also allows you get pressure where clamps could never go and work around curved surfaces for creative woodworking. Depending on your budget there are multiple ways to get into vacuum pressing. At the upper end are dedicated vacuum pumps that automatically shut off and on to maintain pressure over long periods of time. The middle ground is a continuous pump as we're using in the video. And the cheapest introduction into vacuum press veneering is using a hand pump. Vacuum bags can be purchased or made. Although you can use regular wood glue, there are special glues used when vacuum forming that prevent bleed through and dry harder than typical PVA glues.
Join the Make Something Patreon and get behind the scenes access as well as our private discord! [ Ссылка ]
Supplies used in this video (Provided by Rockler)
Vacuum Bag: [ Ссылка ]
Vacuum Pump: [ Ссылка ]
Vacuum Pods: [ Ссылка ]
Vacuum Port Adapter: [ Ссылка ]
Hand Pump: [ Ссылка ]
Veneer Saw: [ Ссылка ]
Veneer: [ Ссылка ]
Veneer Glue: [ Ссылка ]
Glue Roller: [ Ссылка ]
Netting: [ Ссылка ]
#woodworking
![](https://s2.save4k.ru/pic/bVb3BPQBGtA/maxresdefault.jpg)