An overview of the heavy duty Siruba DL7200 industrial needle feed sewing machine.
I go through installing the head on the table, bobbin winding, threading the needle thread and a general overview of the needle feed system.
This machine is equipped with an automatic back tack, under-bed trimmer and auto presser foot lifter.
Part 2 - [ Ссылка ]
Index:
0:00 - Introduction
0:28 - The assembled table
1:11 - Removing the protective cardboard from the table
1:42 - A look at the oil sump
2:11 - Where's the motor?
2:55 - Opening the machine head box and lifting out the head
3:43 - Installing the head into the table
4:50 - Filling the oil and a look under the machine head
6:21 - A look at the machine head itself
7:03 - Installing the thread stand
8:00 - A look at the hand wheel and model information
8:42 - Bobbin winding and threading
12:49 - Ready to test
14:41 - Explaining the needle feed
18:24 - One touch reverse switch
18:45 - Conclusion
My web site - www.institches.co.nz
If you'd like to support my channel, please visit - www.patreon.com/sewingmachines
Ещё видео!