Part 1 - Disassembly: [ Ссылка ]
Part 2 - Assembly: You're Here Now
Part 3 - Tuning: [ Ссылка ]

Carb Kit from Mike’s Carburetor Parts: [ Ссылка ]

In Part 1 of this 3-part series, we showed the removal and disassembly of the rochester quadrajet carburetor. In this segment, part 2, we reassemble the quadrajet 4-barrel with the parts from the rebuild kit. With the rebuild complete, the next step will be installation and tuning on the Olds 442.

The only tools needed for assembly are three straight-slot screwdrivers in varied sizes, a #2 phillips screwdriver, long needle-nose pliers, a handy worklight. In addition, you want to make sure that you have some WD-40, silicone, or spray lubricant of your choice. With the quadrajet body, air-horn and baseplate all cleaned, the concern of grease and grime intrusion almost evaporates. You know what they say: "cleanliness is next to Godliness". You can't go wrong there when dealing with combustion engines, especially fuel and air passages.

To check out part 1, visit this link:
[ Ссылка ]

свернуть