Buy Now!
New Control Arm Set from 1AAuto.com [ Ссылка ]
New Control Arm from 1AAuto.com [ Ссылка ]
This video shows you how to install new control arms in your 2011-2014 Hyundai Sonata. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 22mm Wrench
• 19mm Socket
• 21mm Socket
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Pole Jack
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Hyundai Sonata 2011-14 6th Gen: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
