Google Page: [ Ссылка ] I have been seeing System X ceramic coatings in my newsfeed for ever so I finally decided to reach out to them and see if they wanted to hook me up with some product. They kindly obliged and sent me their Renew spray coating, their base level ceramic coating and their glass coating to do some videos with. Big thanks to Jeff LaRoche for getting me hooked up.

This particular video is on System X renew which is their ceramic spray detailer which is meant to be used as a booster on their coatings every 6 months or so. I am using it as a stand alone coating on the Audi S4 in this video to see how it holds up like that.

System X renew is a Si02 Ceramic based spray coating used as a booster for System X coatings. Renew adds hydrophobic properties, gloss and slickness. Also Can be used as a stand alone to replace wax and sealants. Quic kand easy to apply and nearly impossible to mess up.

Sounds good right?

I am going to go through my process of prep during this video as well to show new/old installers and shoppers to see what proper paint prep prior to applying a basic ceramic coating like this should look like. I use rinse-less wash when I wash cars so this video will done with that. This is what I call the money maker detail, this is for the customer who just wants shine and doesn't want correction, they will pay $299 not $2999 and if you set expectations they will be happy with it afterwards when their ride is wicked shiny. With 2 people these details can be done in under 1.5 hours on most vehicles using minimal product and will yield you a nice review later with your customer who you did not push to spend more than they wanted to.

I started off by pre soaking the vehicle with my rinse less wash solution, followed by a hand wash with soft plushy towels that I fold every panel to avoid using the same side twice, then we hand dry and clay bar the vehicle to remove contaminants. My biggest pet peeve is a drip free finish so I thoroughly blow dry the vehicle to remove all water from trim, badges, door handles, mirrors etc, this prevents dirty water stains and dirty water dribbling down when you are wiping on coating or doing paint correction. I like to spray wax and clean the jambs as well to also keep everything clean and give the customer an extra wow factor. I use a panel prep spray prior to coating to remove any oils or left over clay lube prior to coating the car. I usually include an interior detail with these details as well, just a basic vacuum and wipe down.

When all that prep is done I move on to coating the car in whatever we are using. System X renew can be applied a few ways which I will demonstrate, the first being spraying onto your towel and wiping onto the panel before wiping dry with a secondary towel. For the anal coater you can use a microfiber applicator pad as you would a traditional coating to ensure you really get even coverage, or if you are a trigger happy product waster and you want to treat this the way you treat your cheap detail spray after car washes you can spray directly onto the panel and wipe using a giant drying towel or other soft towel.

This stuff feels exactly like applying a quick detail spray, its not like the other ceramic sprays where you have to do a decent amount of wiping after to fully buff off excess product, it feels exactly like what I use after a regular car wash. That's a pretty sweet feature for something rated to last up to 6 months on a properly prepped surface.

I will test this stuff on the paint, glass, plastic trim , weird mirrors, headlights and wheels in this video and then go over each of them with water after letting the coating cure for a hour to see how hydrophobic they are. All the surfaces showed amazing results with hydrophobic properties. I am pretty impressed with the initial application of this stuff, I have asked my customer to call me in 2 months so I can go do a car wash and see how its holding up.

This is for the professional installer only and not available to the public. You can inquire to be an install at their website [ Ссылка ] and you can follow them on instagram at @systemxceramic

I will be making more content with their other products soon for y'all and then if they like them maybe they will send some more! Thank you System X






1006 E chestnut ave
Santa Ana CA 92701
[ Ссылка ]
[ Ссылка ]



Follow me on social media
IG: @wicked_autodetailing
FB: www.facebook.com/wickeddetails



Email: Sam@wickedautodetailing.com
[ Ссылка ]

свернуть