EDIT and UPDATE 6/22/21 - I was misinformed with my previous call with Phillips and the A-Flex and C-Flex units ARE recalled. My units are from 2009 and 2010 FYI. If you put your serial number in the recall site below make sure to include the number with the additional 4 number/digits after without any spaces. If you write it with a space or incorrectly it will come back as "Not Affected By Recall" which I think is misleading as it should say this is not a proper SN and please re-enter. My machine SN starts with the P025..... and that is a Zero and not the Letter "O". Please enter this in correctly or you will think your machine is safe from the recall when it is not.

Check [ Ссылка ] to see if your model is listed.

Best of luck!


This video is to show how I (a novice) cleaned, inspected and lubricated my machine. This is how the Remstar A-Flex and C-Flex units are assembled and other Remstar units may be the same. This was made prior to the Recall of some units but it's a good way to diagnose if a unit has foam that is breaking down. I am not a repair tech and this is for entertainment purposes. Please contact Phillips Respironics if you need assistance but they will not encourage you to do what I have done here as there is a liability issue.

The foam a the bottom of the machine should be inspected for deterioration of the material. If you notice and issue contact Phillips for advice. I also do not use an ozone cleaner which may add to deterioration of some materials per Phillips.

Phillips Recall information - [ Ссылка ]

свернуть