Ducati Hypermotard with OXFORD nightrider LED indicators.
3d Printed adapters that use existing OEM body hardware locations. Visit Prusa Prints to download.
[ Ссылка ]
Hardware;
QTY 2 - 27 Ohm Wire wound resistors (Go for 10 Watt! - Smaller will get really hot) These are needed to be attached in parallel for the hypermotard flash rate to work correctly.
QTY 2 Indicators of your choice - Oxford kits with 8mm indicator stems are perfect.
The included 10 Ohm resistors in oxford kits will not work for the Ducati ECM controlled indicator circuit. You need the 27 Ohm.
QTY 2 M6x16 hex ( to attach the adapters)
Some wire, solder and heat shrink to wire in the new indicators.
Tools;
Allen Keys, Wire cutters, Soldering Iron, sunny disposition.
I hope this brings you some joy and keep you safe out there.
Ещё видео!