In this video, we are going to show you how to connect and install a PEARL pressure switch to a water pump. However, this procedure could be used in others brands as well. For this example, we used a Square D pressure switch

As always follow all safety precautions when working with any water pumps, water pump accessories, or water pump components.

Make sure the power is disconnected.
You would need several items:
- Pressure Switch
- Connecting Nipple
- Electric cables
- Tools

0:23 Removing a Water Pump Cover: We will begin by removing the water pump’s cover.
0:36 How to remove a cable gland on a water pump?
Then, proceed to remove the cable gland and nut by turning it counterclockwise.
0:48 Replace with the connecting nipple and nut, so you have access to the water pump.
1:20 For this example we are using a Square D Pressure Switch
1:41 Attach the Pressure switch to the connecting nipple, secure, and tighten.
2:10 Insert the connection cables, lose nuts as shown, and connect the cables to the motor. Keep in mind the color code. Then connect the cables to the pressure switch. Follow the color code.
2:40 Insert power cables in the pressure switch and connect them, following color code.
3:57 Reinstall pressure switch cover.
4:05 Reinstall the pump cover

More info: (954)474-9090 or visit Product: [ Ссылка ]

Contact Us: [ Ссылка ]

Please remember before manipulating an electric water system to: - Always read the manufacturer's product manual - All electrical connections and checks must be done by a certified electrician and comply with applicable local standard - Danger: electric shock risk.

When installing or adjusting an electrical system make sure that all plugs and cables are disconnected from the power outlet - Installation of electrical water systems should be done by certified professionals.

свернуть